It is common to see battery cars run out of battery, but it is estimated that about 90% of drivers never start their vehicles. Even starting a car is fairly easy, and no matter what type of car you have, it can be dangerous if you don’t take some precautions.
How to jump-start the car: Jump-start the car can be done by you, but take care of a few precautions. Source: Driving Life
Car Quick Start Guide: Why Do You Need a Fast Start Car?
The most common reason to start a car is that the battery is dead. The most common reason for a dead battery is that the battery is drained and there isn’t enough power to start the starter. When you turn on lights or other electrical devices while the engine is not running, the battery may discharge. If you have a very good battery, the maximum lifespan of a car battery is about 5 years. A battery that has reached the end of its useful life may not be able to be recharged to start the car the next time it is needed. This may be the case if your battery is more than 5 years old.
A dead battery is the main reason why you need a jumper. Source: HotCars
Sometimes, when the car is idle for too long, the battery loses power, which is why the battery can’t start the car. Additionally, events such as battery failure or leaving the headlight can drain all the juice in the battery. Even a faulty alternator can be the reason for a dead battery. Whatever the reason, the only hope for restarting the car is to start it.
But what is a fast-start car?
According to Wikipedia, a quick start, also known as a boost, is a method of starting a vehicle when the battery is depleted or dead. Temporarily connect to another vehicle’s battery or some other external power source. An external power source charges the battery of the faulty vehicle and provides some of the power needed to start the engine. Once the vehicle is started, its normal charging system will be recharged, so the auxiliary power source can be removed. If the vehicle charging system is working properly, the normal operation of the vehicle will restore the charging of the battery.
How to start a car quickly: the tools you need
- Jumper cables
- Plastic gloves
- A pair of splash-resistant polycarbonate
- A wire brush
- The battery of the other car is fully charged, and its voltage is the same as that of the car being jumped.
How to start a car quickly: step by step
These steps below have been simplified, for more details, check out the article Do You Know How to Start a Car!
First of all, you should line up two cars by parking them so that their batteries can easily reach each other, but remember not to touch each other when parking your car.
Second, use the red jumper to connect the positive (+) terminal of the working battery to the positive (+) terminal of the flat battery.
In the third step, connect the black jumper to the negative (-) terminal of the working battery. Then connect the other end to a grounding point away from the flat battery and fuel system. The grounding point is unpainted metal on the engine block or chassis.
Fourth, start the car that will help you love it. Turn off both engines and wait 3 minutes, then start the engine of the working car and let it run for 1 minute.
Fifth, turn on the engine inside the car with a dead battery to start your car.
Then, let both cars idle at a fast pace for about 10 minutes.
Next, turn off the engines of both cars and carefully disconnect the wires in the reverse order of how they are connected. Make sure the leads do not touch each other and do not touch any vehicle when removed.
Finally, try turning the key in the ignition to see if your car will start.
Car Quick Start Guide: Precautions when starting the car
Be sure to read the user manual before attempting a quick start
Each model and brand of battery is different from form to structure. Newer cars often have starter lugs, and the cables need to be connected rather than directly to the battery terminals. In addition, there are some models or brands that simply do not allow users to start the vehicle quickly due to warranty conditions.
If your car allows you to start quickly, remember to read the precautions carefully, such as removing the fuse, turning on the defroster, ……
Remember to read the car manual before starting the car.
Confirm the voltage
This is an important thing you should do when starting your car. If the voltage doesn’t match, both your car and other cars will suffer serious damage.
Be sure to park
You should park both vehicles close to each other but avoid contact. And both cars should be in parking or neutral and have the parking brake activated.
You should park both cars close to each other before a quick start. Cre: Long hair on Wikipedia
Cars with good batteries must be turned off
To avoid any damage, e.g. exploration, burning…… Before starting the car, remember to turn off the engine of the car with a sufficient battery. But the headlights, radios, and turn signals (including hazard lights) of both cars should be turned off.
Unplug the accessory
Any accessories such as mobile phones on the charger should be unplugged. Power surges generated by a quick start can solve them.
Do a good job of wearing protection
You should wear rubber gloves and goggles before starting the surgery. It ensures your safety and the safety of others.
Car Quick Start Guide: Precautions when starting the car
Don’t smoke
Never smoke while starting your car. Smoking is really dangerous, especially when you’re standing near the engine. Batteries are extremely volatile, and even the smallest spark can lead to tragedy. If you do need to smoke, stay away from cars.
Don’t rush to start the car when the battery is ruptured or leaking
Remember to inspect both batteries for signs of physical damage, specifically for cracks or liquid leaks in the case. If the battery leaks or cracks, stop the fast start immediately. Attempting to jump-start a leaking battery can result in a catastrophic explosion as the spark ignites the volatile gases escaping from the battery.
How do I start my car quickly? An important precaution is to check if the battery is leaking or cracking. Source: CarCareHunt
Don’t let the cable dangle from the car
Once the cables are connected, they will charge. If that charge hits a puddle of water, you may be electrocuted. If the cable falls towards the fender, it may cause sparks. So, go ahead and check your surroundings.
Do not connect to the negative pole of a dead battery.
If connected to the negative terminal of the battery, an accidental explosion can occur. You definitely don’t want it to happen. So be careful!
Remember not to connect to the negative terminal of a dead battery.
Do not use low-quality and low-quality cables
The jumper cables must be in good condition when jumping to start the car. It needs to be at least 3 meters long, color-coded. Before proceeding, you should check if the insulation is damaged or if the wires are frayed. Cables in poor condition can cause sparks, fires, and pose a danger to people who start their cars quickly.
If you’re not sure what you’re doing, don’t start the car.
Car Quick Start Guide: If you’re not sure if you can do this, or if you try to start the car once but it doesn’t work. Don’t hesitate to call a professional who knows how to save your car because your car may face other more dangerous problems such as starter failure, alternator damage, ……
Summary
How do I start my car quickly? There are a few things you should know before starting your car. If there are certain conditions in your car, such as a leaking battery, you should have it repaired. The best advice is: If you’re not sure what you’re doing, call a professional because you could seriously damage your car and other vehicles. Whether you drive a manual or automatic car, there’s always a way to take better care of your car.
